Buru Energy Ltd (ASX:BRU) spudded the Ungani 8H development well at its Ungani Oilfield in the Canning Basin on December 18, 2021.
The well is being drilled by the Ensign 963 drilling rig and is expected to take some 32 days to drill and complete.
Buru Energy, as operator, and Roc Oil (Canning) Pty Ltd each have a 50% equity interest in the well and in the L20 Production Licence.
The Ungani 8H well surface location is on Production Licence L20, some 700 metres to the north-northwest of the Ungani 1 and 2 wellheads and the Ungani Production Facility.
Production potential
Buru Energy executive chairman Eric Streitberg said: “We are very pleased to be drilling a further development well on the Ungani Oilfield to take advantage of the current strong oil price environment.
“The well will also provide valuable information as to the remaining production potential of the field.
“We have also planned the well carefully taking into account our learnings from the Ungani 6 and 7 drilling campaign to ensure we have the potential for the best outcome from drilling the horizontal section of the well.”
Well objective
The Ungani 8H is designed to access undrained oil reserves in a crestal location within the northeastern part of the central fault block (CFB) of the Ungani Field.
The Ungani 6H and 6H ST/1 wells drilled in 2019 targeted the same culmination within the CFB but were unable to complete the planned horizontal reservoir section due to operational issues.
Ungani 8H is planned to intersect the Ungani Dolomite reservoir section at least 50 metres above the original oil water contact at a subsea depth of 2,065 metres.
Ungani 6H and 6H/ST1 provide the closest offset well control with the reservoir intersection in Ungani 8H predicted to be some 50 metres laterally from the U6H/6HST1 intersections and some 550 metres laterally from the surface location.
Once the top of the Ungani Dolomite is intersected a casing string will be set and the well will then be drilled horizontally through the Ungani Dolomite reservoir section.
The well will be completed 'barefoot' without casing over the reservoir section to provide the optimum flow path and production volumes.